Dell 3130cn Color Laser Printer - Manual (Page 205)

Before you start remote installation, perform the following procedures.
Allow Print Spooler to Accept Client Connections
NOTE: This step is required for Windows Vista, Windows Vista 64-bit Edition, Windows XP, Windows XP 64-bit
Edition, Windows Server 2003, Windows Server 2003 x64 Edition, Windows Server 2008, Windows Server 2008 64-
bit Edition, Windows Server 2008 R2 64-bit Edition, Windows 7, and Windows 7 64-bit Edition.
For Windows XP, Windows Vista, Windows Server 2003, and Windows Server 2008:
1. Click start ® All Programs (for Windows Vista only)® Accessories (for Windows Vista only)® Run.
2. Type gpedit.msc, and then click OK.
3. Click Computer Configuration ® Administrative Templates® Printers.
4. Right-click Allow Print Spooler to accept client connections and select Properties.
5. From the Setting tab, select Enabled, and then click OK.
6. Restart the computer.
For Windows Server 2008 R2 and Windows 7:
1. Click Start ® All Programs (for Windows 7 only)® Accessories (for Windows 7 only)® Run.
2. Type gpedit.msc, and then click OK.
3. Click Computer Configuration ® Administrative Templates® Printers.
4. Right-click Allow Print Spooler to accept client connections and select Edit.
5. Select Enabled, and then click OK.
6. Restart the computer.
Share the Firewall File and Printer
NOTE: This step is required for Windows Vista, Windows Vista 64-bit Edition, Windows XP, Windows XP 64-bit
Edition, Windows Server 2008, Windows Server 2008 64-bit Edition, Windows Server 2008 R2 64-bit Edition,
Windows 7, and Windows 7 64-bit Edition.
For Windows Vista:
1. Click start ® Control Panel.
2. Select Security.
3. Click Windows Firewall.
4. Click Change settings.
5. Click Continue.
6. From the Exceptions tab, check the File and Printer Sharing check box, and then click OK.
For Windows Server 2008: