Dell 3130cn Color Laser Printer - Manual (Page 28)

Time-Out Specifies in seconds the amount of time the printer should wait for data to arrive from the computer. The print job is cancelled if the time-out time is exceeded.
Panel Language Sets the language to be used on the operator panel.
Auto Log Print Specifies whether to automatically print a log of completed jobs after every 20 jobs.
Print ID Specifies where to print the user ID on the output paper.
Print Text Specifies whether the printer outputs PDL data, which is not supported by the printer, as text when the printer receives it.
Banner Sheet Insert Position Specifies where to insert a banner sheet.
Banner Sheet Specify Tray Specifies which input tray to use to insert a banner sheet.
RAM Disk
Specifies whether to allocate RAM for the file system for the Secure Print and Store Print features.
This item is only available when the 512 MB, or higher, optional memory is installed, and also when the optional hard disk is not installed.
Substitute Tray Specifies whether or not to use another size paper when the paper that is loaded in the specified tray does not match the paper size settings for the current job.
mm / inch Specifies the measurement unit to be used on the operator panel screen as either mm or inches.
Odd Page 2 Sided
Specifies how the odd last page is printed when using duplex printing.
This item is only available when the optional duplexer is installed.
Parallel Settings
Purpose:
To configure the parallel interface.
Values:
Port Status Specifies whether to enable the parallel interface.
ECP Specifies whether to enable the ECP communication mode of the parallel interface.
Adobe Protocol Specifies PostScript communication protocol for each interface.
Network Settings
Purpose:
To Specify the PostScript communication protocol for this printer.
Values:
Adobe Protocol Specifies PostScript communication protocol for each interface.
USB Settings
Purpose:
To change printer settings affecting a USB port.
Values:
Port Status Specifies whether to enable the USB interface.
Adobe Protocol Specifies PostScript communication protocol for each interface.
PCL Settings
Purpose:
To change the printer settings that only affect jobs using the PCL emulation printer language.
Values:
Paper Tray Specifies the input tray.
Paper Size Specifies the paper size.
Custom Size - Y Specifies the length of custom size paper.
Custom Size - X Specifies the width of custom size paper.
Orientation Specifies how text and graphics are oriented on the page.