Dell 3130cn Color Laser Printer - Manual (Page 41)

To edit the detailed settings of SNMP v1/v2c protocol.
To enter this page, click Edit SNMP v1/v2c Properties in the SNMP page.
Values:
Community Name (Read
only)*
1
Specifies the community name to access (read only) data using up to 31 alphanumeric characters.
The original setting will remain valid if no input is made. Characters entered for community name in the previous settings will not be displayed on the screen. The default Read Community is public.
Re-enter Community Name
(Read only)*
1
Enter the community name to access (read only) data again to confirm it.
Community Name
(Read/Write)*
1
Specifies the community name to access (read and write) data using up to 31 alphanumeric characters.
The original setting will remain valid if no input is made. Characters entered for community name in the previous settings will not be displayed on the screen. The default Read/Write Community is private.
Re-enter Community Name
(Read/Write)*
1
Enter the community name to access (read and write) data again to confirm it.
Community Name (Trap)* 1
Specifies the community name used for trap up to 31 alphanumeric characters.
The original settings will remain valid if no input is made. Characters entered for Community Name (Trap) in the previous settings will not be displayed on the screen. The default Trap Community is " " (NULL).
Re-enter Community Name
(Trap)*
1
Enter the community name used for trap again to confirm it.
Trap Notification 1-4
Select the check boxes to notify trap occurrence. In this case, specify the IP address and IP socket in the following format:
IPv4
Specify the IP address and IP socket in the nnn.nnn.nnn.nnn:mmmmm format. Each section of "nnn" is a variable value between 0 and 255. Note that values 127 and 224-254 are not valid for the first three-digits only. IP
socket mmmmm is a variable value between 0 and 65535.
IPv6
Specify the IP address and IP socket in the xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmmmm format. Each section of "xxxx" is a hexadecimal variable value between 0 and ffff. IP socket mmmmm is a variable value
between 0 and 65535.
IPX* 2
Specify the IPX address in the nnnnnnnn.mmmmmmmmmmmm.llll format. IP network nnnnnnnn is a hexadecimal variable value between 0 and ffffffff, IPX node mmmmmmmmmmmm is a hexadecimal value between 0
and ffffffffffff and IPX socket llll is a hexadecimal variable value between 0 and ffff.
Authenticate Error Trap Select the check box to notify Authenticate Error Trap.
* 1 The default value of each items can be changed by using Dell Printer Configuration Web Tool.
* 2 An optional network protocol adapter is required to display the item.
SNMP v3
Purpose:
To edit the detailed settings of SNMP v3 protocol.
To enter this page, click Enable SNMP v3 Protocol in the SNMP page.
Values:
Administrator Account
Account Enabled Select the check box to enable the administrator account.
User Name Enter the user name of the administrator account.
Authentication Password Specifies the authentication password of the administrator account using 8 to 32 alphanumeric characters.
Re-enter Authentication Password Enter the authentication password of the administrator account again to confirm it.
Privacy Password Specifies the privacy password of the administrator account using 8 to 32 alphanumeric characters.
Re-enter Privacy Password Enter the privacy password of the administrator account again to confirm it.
Print Drivers / Remote Client Account
Account Enabled Select the check box to enable the print drivers and remote client account.
Reset to default Password Click to reset the password for the print drivers and remote client account to default.
Other Features
The Other Features tab includes Set Password, SSL/TLS, IPsec, 802.1x, and Reset Print Server pages.
Set Password
Purpose: