Dell 3130cn Color Laser Printer - Manual (Page 54)

a. Click start ® All Programs® Dell Printers® Dell 3130cn Color Laser Printer® Tool Box.
The Select Printer dialog box opens.
b. Click Dell 3130cn Color Laser PCL 6 listed in Printer Name, and then click OK.
The Tool Box opens.
c. Click the Printer Settings Report tab.
d. Select Reports from the list at the left side of the page.
The Reports page is displayed.
e. Click the Printer Settings button.
The printer settings page is printed.
f. Verify Memory Capacity listed in the printer settings under General.
If the memory capacity has not increased, turn off the printer, unplug the power cable, and reinstall the memory.
9. If you installed the additional print memory after installing the printer driver, update your driver by following the instructions for the operating system you are using. If the printer is on a network, update the driver for each client.
When Using PCL Driver:
Windows 7/7 x64/Server 2008 R2 x64 1. Click Start ® Devices and Printers.
2. Right-click the printer and select Printer properties.
3. Click the Options tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Close the Devices and Printers dialog box.
Windows Vista/Vista x64 1. Click start ® Control Panel® Hardware and Sound® Printers.
2. Right-click the printer and select Properties.
3. Click the Options tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Close the Printers dialog box.
Windows Server 2008/Server 2008 x64 1. Click start ® Control Panel® Printers.
2. Right-click the printer and select Properties.
3. Click the Options tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Close the Printers dialog box.
Windows XP/XP x64/Windows Server 2003/Windows Server 2003 x64 1. Click start ® Printers and Faxes.
2. Right-click the printer and select Properties.
3. Click the Options tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Close the Printers and Faxes dialog box.
Windows 2000/Windows NT 4.0 1. Click start ® Settings® Printers.
2. Right-click the printer and select Properties.
3. Click the Options tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Close the Printers dialog box.
If the printer information is not updated automatically after clicking Get Information from Printer, follow these steps:
1. Click the Options tab, and then select Memory Capacity in the Items list box.
2. Select the total amount of the installed print memory for the memory capacity setting.
3. Click Apply, and then click OK.
4. Close the Printers and Faxes, Printers, or Devices and Printers dialog box.
When Using PS Driver:
Windows 7/7 x64/Server 2008 R2 x64 1. Click Start ® Devices and Printers.