Dell 3130cn Color Laser Printer - Manual (Page 29)

2 Sided Sets duplexing as the default for all print jobs. This item is only available when the optional duplexer is installed.
Font Specifies the font from the list of registered fonts.
Symbol Set Specifies a symbol set for the specified font.
Font Size Specifies the font size for scalable typographic fonts.
Font Pitch Specifies the font pitch for scalable monospaced fonts.
Form Line Specifies the number of characters in a line.
Quantity Sets the number of copies to print.
Image Enhancement Specifies whether to enable the Image Enhancement feature.
Hex Dump Specifies whether to help isolate the source of a print job problem. With Hex Dump selected, all data sent to the printer is printed in hexadecimal and character representation. Control codes are not executed.
Draft Mode Specifies whether to print in the draft mode.
Line Termination Specifies how to handle line terminations.
Default Color Specifies the print color mode to Color or Black. This setting is used for print jobs without a specified color print mode.
PS Settings
Purpose:
To change printer settings that only affect jobs using the PostScript emulation printer language.
Values:
PS Error Report Specifies whether the printer outputs error contents for a PostScript error.
PS Job Time-Out Specifies the execution time for one PostScript job.
Init PS Disk Erases the PS fonts stored on the optional hard disk. This item is only available when the optional hard disk is installed.
Paper Select Mode Specifies the way to select the tray for the PostScript mode.
Default Color Specifies the default color mode for the PostScript mode.
Secure Settings
Panel Lock Set
Purpose:
To set whether to lock Admin Menu with a password, and to set or change the password.
Values:
Panel Lock Set Sets whether to lock Admin Menu with a password.
New Password Sets a password that is required to access Admin Menu.
Re-enter Password Enter the new password again to confirm.
NOTE: This menu sets a password to lock the operator panel. When changing the password for the Dell Printer Configuration Web Tool, click Set Password on the Left Frame and set the password.
Printer Maintenance
The Printer Maintenance tab includes Paper Density, Adjust BTR, Adjust Fuser, Auto Registration Adjustment, Color Registration Adjustments, Adjust Altitude, Reset Defaults, Non-Dell Toner, Initialize PrintMeter, Storage, and Web Link
Customization pages.
Paper Density
Purpose:
To specify the paper density.
Values:
Plain Sets the density of plain paper to Light or Normal.
Label Sets the density of labels to Light or Normal.
Adjust BTR