Dell 3130cn Color Laser Printer - Manual (Page 278)

When only job owner name is specified (-Jown=jobownername:) (no password specified),
authentication password is treated as not specified.
When only password is specified (-Jown=:password) (no job owner name specified), login user name
is used as job owner name. Entered password is used as authentication password.
When neither of job owner name nor password is specified (-Jown=:), login user name is used as job
owner name, and authentication password is treated as not specified.
When a job owner name exceeds allowable character length, the extra characters are ignored.
When an unacceptable character is specified for job owner name, "Unknown User" is used as job owner
name.
NOTE: Characters acceptable for job owner name are alphanumeric characters and symbols, except for space and
colon.
NOTE: Up to 32 characters are acceptable for job owner name.
When an unacceptable character is specified for password, or when a specified password is not within
the range of the allowable character length, the authentication password is treated as not specified.
NOTE: Acceptable password length is between 4 and 12 characters.
Incomplete form of -Jown option is treated as no authentication setting being made. In such case, if
authentication setting is made with the environmental variable, it is used as setting information.
Example
To output the displayed screen image to a file using the snapshot command and convert the file into the PostScript
language program using the sunras2ps2 command, type as follows.
% sunras2ps2 file.rs > file.ps
To output the displayed screen image to a file using the snapshot command, convert the file into the PostScript language
program using the sunras2ps2 command and output it to a printer, type as follows.
% sunras2ps2 file.rs | lp
Important
When -s and -S are specified at the same time or when the same option is specified twice, the later setting will
prevail.
If the output size option (-s, -S) is not specified, scaling will be executed taking one pixel of the raster data as
one pixel of the printer.
If the print position option specifies a point beyond the printable area of the printer, data beyond the printable area
will not be printed.
tiff2ps2 (Solaris/HP-UX)
Format
/usr/local/dellbin3130/tiff2ps2 [-d] [-D] [-Itray-input ] [-t] [-r] [-n] [-l=left,bottom] [-
s=width ,height] [-S=width ] [-E] [-Nc=copies] [-Cl] [-Hd=position:format] [-Hffont] [-MSI] [-M=type]
[-Mfo=mode ] [-Pon] [-St=mode] [-Sp] [-Sb] [-Cm=mode] [-Pr=mode] [-Cc=mode] [-Gc=mode] [-Sc=mode] [-
Gg=mode] [-Ct] [-Br= mode] [-RGBc= mode] [-RGBPr= mode] [-RGBTp= mode] [-Cb=cyan-low:cyan-
middle:cyanhigh:magenta-low:magenta-middle:magenta-high:yellow-low;yellow -middle:yellow high:black -
low:black-middle:black-high] [-Hld=PrintType:UserID:Password:DocumentName] [-Jown=
jobownername:password] [filename...]