I before you start, Checking the battery level, 2cr5 lithium battery service life – Canon EOS 50E User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

I Before You Start

Checking the Battery Level

While pressing the lock release

* button, turn the Command Dial to a

Programmed Image Control mode

or Creative Zone mode.

^ The battery level will be displayed
“ on the LCD panel by one of the

following symbols:

: Battery level OK.
: Keep spare battery handy.

Battery is almost exhausted.
See page 7.

• The battery level can be checked virhen the

Command Dial is unlocked and when the

shutter is released

2CR5 Lithium Battery Service Life

Ambient

Temperature

0% Flash Use

50% Flash Use

100% Flash Use

At 20‘>C

90 (110) rolls

35 (40) rolls

18 (20) rolls

At-20°C

45 (50) rolls

14 (15) rolls

6 (7) rolls

No of 24-exposure rolls based on Canon’s Standard Test Method with a new battery and

EF 50mm f/1 4 USM lens.

Operating the camera without film will still consume battery power and reduce the number of

rolls that can be taken with the battery
In parentheses. No of rolls without the use of Eye-Controlled Autofocus

SI

if nothing is displayed on the LCD panel, the battery may have been installed

incorrectly. Take out the battery and install it correctly.
Before using the camera, check the battery level.

In areas where 2CR5 batteries may not be easily available, take spare

batteries with you.

18

Advertising