Quick start guide – Canon EOS 50E User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Quick Start Guide
^ Install the battery.
As shown in the figure, open the
battery compartment cover and
insert a 2CR5 battery.
Attach a lens.
Align the red dots on the lens and
camera and turn the lens clockwise
until it snaps in place.
3
While pressing the lock release
button, turn the Command Dial to
□ (Full Auto mode).
Load the film.
Align the edge of the film leader
with the orange mark on the
camera and close the camera
back until it snaps shut. The film
will then advance to frame 1
automatically.
Advertising