Al servo eye-controlled autofocus, Canceling eye-controlled autofocus, Eye-controlled depth-of-field preview – Canon EOS 50E User Manual

Page 48

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

I. AF Modes and Metering Modes

Al Servo Eye-Controlled Autofocus

When Eye-Controlled Autofocus Is used with Al Servo AF (even when set by Al Focus AF), a

moving subject can be focus-tracked continuously with your eye. This is called Al Servo Eye-

Controlled Autofocus.
After the eye-selected focusing point focuses the subject and the subject starts moving, you
can continue to focus the subject by looking at the next focusing point which the subject moves

to.

Canceling Eye-Controlled Autofocus

To cancel Eye-Controlled Autofocus, press the focusing point selector and turn the Main Dial to

set it to automatic or manual focusing point selection

Eye-Controlled Depth-of-Field Preview

You can check the depth of field just by looking at the depth-of-field preview mark in the

viewfinder

After focusing the subject, keep

pressing

the

shutter

button

halfway.

This

feature

is

available

when

the

Command Dial is set to a Creative Zone

mode and the AF mode is set to One-Shot

AF

Within 6 seconds after focus is
achieved, look at the depth-of-fleld

preview mark in the viewfinder.

The aperture will then stop down
to the set aperture value.

If 6 seconds elapse before you look at the

depth-of-field mark, focus again and then

look at the depth-of-field mark wifhin 6

sec.

The aperture returns to the maximum

opening

when

the

shutter

button

is

released.

48

While you check the depth-of-field, you can press the shutter button completely to
take the picture. It Speedlite 380 EX is used, the camera will automatically return
to full aperture before firing the preflash.

Advertising