Canon EOS 50E User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Nomenclature
Hold down the film cartridge and
pull the edge of the film leader to
the orange mark on the camera.
• If the edge of fhe film leader goes beyond
the orange mark, rewind some of the film
back info the cartridge
Wrong
After checking that the film leader
edge is correctly aligned with the
orange mark, close the camera
back. The film will then advance
automatically to frame 1 as shown
by the frame counter /.
If frame number 1 is not displayed and
film cartridge symbol @ blinks, the film
has not been loaded properly. Load the
film properly
22
Advertising