Autoexposure bracketing (aeb) – Canon EOS 50E User Manual
Page 71
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6. Autoexposure Bracketing (AEB)
With autoexposure bracketing, the camera automatically changes the
exposure level within the set range for three successive frames. The
bracketing amount centers on the correct exposure, and the exposure can
be varied up to +2 stops in half stops. The three bracketed shots are
exposed in the following sequence: correct exposure, underexposure, and
overexposure. The film advances according to the current film advance
mode. (See “Film Advance Modes” on page 76.)
Bracketing is helpful for obtaining the desired exposure, especially with
reversal film which has a narrow exposure latitude.
Correct exposure
Underexposure (-1/2) Overexposure (+1/2)
H Press the function button until the
* AEB symbol
AEB
appears.
Turn the Main Dial to set
desired bracketing amount.
the
The bracketing amount is dispiayed on
the LCD panei. For example, if it is set to
0 5, the bracketing sequence will be:
correct exposure, underexposure by -0.5
stop, and overexposure by +0 5 stop.
71