Shifting the program – Canon EOS 50E User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IV. Creative Zone Modes
Check the shutter speed and
aperture setting, then press the
shutter button completely to take
the picture.
As long as the shutter speed and aperture
setting do not blink, a correct exposure wili
be obtained
^
If the 30“ shutter speed and the maximum aperture setting blink, the scene is too
dark. Use a flash. See “2. Using the Built-in Flash” on page 64.
If the 4000 shutter speed and the minimum aperture setting blink, the scene is too
bright. Attach a neutral density filter (sold separately) on the lens to reduce the
amount of light received by the camera
I
Shifting the Program
You can freely change the shutter speed and aperture combination
(program) set by the Program AE mode while maintaining the same
exposure value. This is called shifting the program. To shift the
program, press the shutter button halfway and turn the Main Dial until
the desired shutter speed or aperture setting is displayed.
the shifted program is canceled
After the picture is taken with the shifted program,
automatically and the original program is restored.
If the built-in flash is used, the program cannot be shifted.
51