D 6. eye-controlled autofocus calibration, Eye-controlled autofocus calibration, Calibration for horizontal framing – Canon EOS 50E User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
D 6. Eye-Controlled Autofocus Calibration
With Eye-Controlled Autofocus, you select the desired focusing point just
by looking at it. The camera detects your eye movement and instantly
senses which focusing point your eye is looking at and focuses at that
point. However, since each person’s eye differs depending on pupil size,
contact lens or eyeglass use, etc., the eye movement characteristics must
be registered to calibrate the Eye-Controlled Autofocus feature.
Eye-Controlled Autofocus Calibration
Three calibration settings (1 to 3) can be set and used. For example,
calibration No. 1 can be used for your naked eye. No. 2 for when you use
contact lenses or eyeglasses, and No. 3 for another user’s eye.
• During the calibration, do not take your eye off the viewfinder until the calibration is
completed.
^ Calibrate for both horizontal and vertical framing under a calibration No.
s
Calibration for Horizontal
Framing
Set the Command Dial to ^.
1
The LCD panel and viewfinder displays
CAL- and the calibration No A blinking
calibration No
indicates
that
calibration
has not been set If the calibration No. is
displayed without blinking, it indicates that
calibration has been set for that No
40