Unloading film, Midroll film rewind – Canon EOS 50E User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nomenclature
Unloading Film
After the film’s last frame is exposed, the camera rewinds the film
automatically.
•i
While the film rewinds, the scale on
’ the LCD panel and viewfinder
“flows” from right to left to indicate
that the film is rewinding.
At the same time, the frame
counter counts down.
After
the
film
is
completely
rewound, the film cartridge symbol
©blinks. Check that the film
cartridge symbol is blinking, then
open the camera back and remove
the film cartridge.
Midroll Film Rewind
To rewind the film before reaching the
last frame, press the 0« film rewind
button. The film will start rewinding
immediately. In this case, the scale in
the viewfinder does not indicate that
the film is rewinding.
Film rewind is normally set to the silent mode. Pressing the film rewind button
can switch between the silent rewind mode and high-speed rewind mode.
0
Immediately before midroll film rewind starts, the mirror will make a sound. This is
normal.
23