2 maintenance and cleaning, 16 troubleshooting, 1 safety notices – CASO Germany SousVide Center SV1000 User Manual

Page 38: 2 troubleshooting, Danger

Advertising
background image

caso SV1000

38

15.2 Maintenance and cleaning:

After each use, drain the water completely via the drain hose. No water should be left in
the bin.

Keep the filter on the water inlet in the bin clean. Use a brush to clean before and after
use.

Fill the bin with clean water only, not with any other items.

If a cooking bag should burst or an object get into the water bin, you should clean the bin.
In this case, do not let the water flow out through the drain hole. Pour everything out of the
bin from above. Use a soft cloth or sponge and mild soap to clean the bin of all objects.

Never immerse the unit into water or other liquids while cleaning.

Do not use abrasives or aggressive (caustic) chemicals when cleaning the unit.

Never place the appliance in a dishwasher.

From time to time (once a month) or if a bag has burst, you should perform a cleaning run
of your machine. To this end, fill clean water up to above the MIN marker line and add a
mild detergent (no foam cleaner or acidic cleaning agents). Set the temperature to 40 C
(104°F) and run the unit for 20 minutes in the normal cooking cycle. Then drain the water
completely. If necessary, repeat the cycle to clean the device
thoroughly.

Cleaning of the lid: The transparent part of the cover can be
removed and is dishwasher-proof. Never place the entire lid in
the dishwasher.

16 Troubleshooting

The following table may help you narrow down and address minor malfunctions:

16.1 Safety notices

Danger

► Only qualified electricians, who have been trained by the manufacturer may carry out

any repairs on electrical equipment.

► Improperly performed repairs may result in personal injury or damage to the device.

16.2 Troubleshooting

The device does not work:

1. Check that the cable is properly plugged into the wall socket

2. Check cable for damage.

3. Verify that the wall socket works with another device.

4. Verify that key (Key 1) is lit. If so, determine whether key

(Key 1) has been

pressed for more than 1 second.

Advertising