CASO Germany SousVide Center SV1000 - Manual (Page 39)

caso SV1000 39
16.3 Troubleshooting table
The digital display is lit, but the device does not start the cooking program and displays an
error code instead:
Error Code Possible Causes Solution
E001 1. Bin is empty Fill clean water up to above the “MIN”
level.
2. Water too low Fill clean water up to above the “MIN”
level.
3. Device is not positioned
correctly on the table Place the device on a flat surface
4. The system cannot determine if
there is water in the bin Sprinkle a little salt into the water and mix
this well.
Error in electronics Please contact customer service
E002 1. Particles in filter Please clean the filter thoroughly.
2. Bag blocks water inlet Please re-position bag. Always use the
designated bag holder for the bag.
3. Bag blocks water outlet. Please re-position bag. Always use the
designated bag holder for the bag.
4. Bag burst, food blocks the water
inlet. Start the cleaning process according to
chapter Maintenance and Cleaning
5. Dirt accumulates inside the
circulation system of the device. Start the cleaning process according to
chapter Maintenance and Cleaning
6. Electronics error Contact customer service
E009 1. Electronics defect Contact customer service
PLEASE NOTE
► In the event of technical troubles, faulty devices or missing parts, please contact
Customer Service.
16.4 Disposal of the Old Device
To protect the environment, it’s important to dispose of old electronic devices
properly. Do not place your old unit in the non-recyclable waste under any
circumstances.
PLEASE NOTE
► Please take your old unit to the nearest recycling center for safe disposal.
► Until it can be disposed of properly, store your old unit away from children.