Catler FP 8010 - Manual (Page 10)

9
ASSEMBLING YOUR FOOD PROCESSOR FP 8010
ASSEMBLING YOUR FOOD PROCESSOR FP 8010
BEFORE FIRST USE
Before using your Catler food processor,
become familiar with all the parts. Remove all
packaging materials and promotional labels,
being careful when handling the processing
blades and discs as they are very sharp. Wash
the processing bowl, processing lid and other
attachments in warm, soapy water. Rinse and
dry thoroughly. (Refer to cleaning, care and
storage section).
1. Place the motor base on a dry, level work
surface. Place the processing bowl on to
the motor base with the handle in line
with the ‘ALIGN HANDLE’ graphic on the
motor base. (See Figure 1).
Fig. 1
2. Turn the processing bowl clockwise
until the handle aligns with the ‘TURN
TO LOCK’ graphic. The processing bowl
should be securely locked into position.
(See Figure 2).
Fig. 2
3. If using a disc, fi rst assemble the disc
spindle onto the bowl drive coupling.
Orientate the disc so that the side you
wish to use is facing upwards. Hold the
disc by the centre plastic moulding
and position the central hole above the
attachment spindle. Push down fi rmly
until fi tted correctly. (Please note that
these discs only fi t the larger processing
bowl).
Fig. 3
4. For using the processing blades, carefully
grasp either the quad blade, dough
blade or mini processing blade using the
central plastic support and position it
over the bowl drive coupling and push
down until inserted correctly. If using the
mini processing blade, ensure the mini
processing bowl is assembled into the
main bowl fi rst.
Fig. 4