Catler FP 8010 - Manual (Page 5)

4
CATLER RECOMMENDS SAFETY FIRST
CATLER RECOMMENDS SAFETY FIRST
At Catler we are very safety conscious. We design and manufacture consumer products with
the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise
a degree of care when using any electrical appliance and adhere to the following precautions.
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS
BEFORE USE AND SAVE FOR
FUTURE REFERENCE
• Carefully read all instructions before
operating and save for future reference.
• Remove any packaging material and
promotional labels before using the food
processor for the fi rst time.
• Do not place the food processor near
the edge of a bench or table during
operation. Ensure the surface is level,
clean and free of water, fl our, etc.
Vibration during operation may cause the
appliance to move.
• Do not place this appliance on or near
a hot gas or electric burner, or where it
could touch a heated oven.
• Handle the food processor and
attachments with care – remember the
blades and discs are razor-sharp
and should be kept out of reach
of children.
• Always make sure the food processor is
completely assembled before operating.
The appliance will not operate unless
properly assembled.
• Ensure the OFF button has been pressed,
and the food processor is switched off at
the power outlet and unplugged before
attaching the quad blade, dough blade,
disc or processing lid.
• Always secure the processing bowl onto
the motor base before attaching the
quad blade, dough blade or discs.
• Always operate the food processor
with the processing lid securely
in position.
• Do not push food into the feed chute
with your fi ngers or other utensils. Always
use the food pusher provided.
• Keep hands, knives and other utensils
away from moving quad blade, dough
blade or discs.
• Do not place hands or fi ngers in the bowl
of the food processor unless the motor,
quad blade, dough blade or discs have
come to a complete stop.
• Ensure the OFF button has been pressed
to switch the motor off and the appliance
is switched off at the power outlet and
unplugged before removing the lid from
the bowl.
• Do not use attachments other than those
provided with the food processor.
• Do not attempt to operate the food
processor by any method other than
those described in this booklet.
• Ensure the motor, blades or discs
have completely stopped before
disassembling. Ensure the OFF button
has been pressed and the appliance
is switched off at the power outlet
and unplugged when not in use, if left
unattended and before disassembling,
cleaning or storing.
• Care should be taken when removing
the food from the processing bowl by
ensuring the motor, quad blade, dough
blade or disc, have completely stopped
before disassembling. Ensure the OFF
button has been pressed to switch the
motor off ; the appliance is switched off
at the power outlet and unplugged,
before removing the lid from the bowl.
The processing bowl should then be
unlocked from the motor body and
the quad blade, dough blade or discs
carefully removed before attempting to
remove the processed food.