Catler FP 8010 - Manual (Page 12)

11
10. At the end of processing, always wait
until the blades or discs have stopped
spinning before unlocking and removing
the lid. To remove the processing lid,
ensure the POWER/OFF button has been
pressed, the power is switched off at the
power outlet and the cord is unplugged
from the power outlet. Holding the feed
chute and pressing down fi rmly at the
same time, turn the lid anti-clockwise
so that the arrow graphics are no longer
aligned.
NOTE:
As a safety feature, the food processor
will automatically switch off when the
lid is unlocked; however, it is good
practice to manually switch off the
food processor using the POWER/OFF
button before removing the lid.
11. Remove the processing bowl (before
removing blade or discs) by turning it
anti-clockwise until the handle is in line
with the ‘ALIGN HANDLE’. Lift the bowl off
the motor shaft.
When removing the discs - carefully
remove by gripping the plastic hub on
the centre of the disc and lifting the disc
up and away from the pin on the spindle.
NOTE:
Reassemble the food processor by
locking the bowl into position before
attaching blade, disc or lid.
NOTE:
Care should be taken when removing
the food from the processing bowl by
ensuring the motor, processing blade,
dough blade or discs have completely
stopped before disassembling. Ensure
the POWER/OFF button is pressed to
switch the motor off , the appliance
is switched off at the power outlet
and it is unplugged, before removing
the lid from the bowl. The processing
bowl should then be unlocked from
the motor body, then the quad blade,
dough or disc carefully removed
before attempting to remove the
processed food.
ASSEMBLING YOUR FOOD PROCESSOR FP 8010