Dynojet 250: Torque Module - Manual (Page 8)

Torque Module Installation and User Guide for Model 250 Dynamometers
C H A P T E R 1
Torque Module Installation
1-4
I NSTALLING THE T ORQUE M ODULE
1 Turn off the main power switch on the CPU Module on the dyno electronics and
unplug the power cord.
2 Remove the dust cover from the existing top module.
Figure 1-1: Remove Dust Cover
3 Loosen the top right screw on the back of the existing top module.
4 Plug the Torque Module into the existing top module. Place the dust cover,
removed in step 2, on the Torque Module.
5 Secure the grounding strap on the back of the Torque Module to the existing top
module.
Figure 1-2: Secure Grounding Strap
dust cover
power cord
input
power switch
grounding strap