EFCO 406 (T) Series - Manual (Page 10)

SECTION III FABRICATION
B - SHEAR BLOCKS AT SCREW
SPLINE DOOR JAMB
NOTE: (2) pc. horizontal (9357/9358) cannot be shear block assembled.
INVERT #8401 HORIZONTAL FOR I.G. TRANSOM
HEAD & HORIZONTAL SHEAR BLOCK TO S.S. DOOR JAMB
1) TEMPLATE FOR O.G. SHEAR BLOCKS
Door jambs must run to the floor and are cut longer than other verticals.
Shear blocks are not applicable with 2 pc. horizontal intermediates.
OUTSIDE GLAZED AS SHOWN, INVERT PATTERN FOR INSIDE GLAZE APPLICATIONS
USE BLOCKED OUT HOLE LOCATIONS FOR O.G. SHEAR BLOCK APPLICATIONS
K977
I.G. HEAD
O.G. HORIZONTAL
TUBULAR
PACKAGE
SHEAR BLOCK
DRILL JIGS ARE ALSO AVAILABLE
FIG. # 3
8401
DOOR JAMB
O.G. HEAD
CAUTION:
1.118
# 26 Drill (.147 dia.)
S100 FASTENERS
9359
(4) PLACES
2.000
CL L C
9358
CL
8402
L
C
.861
.340
1.525
1.300
.340
1.525
(CONT.)
PAGE 8
DPS 12/2002 406 STOREFRONT