EFCO 406 (T) Series - Manual (Page 31)

C - SILL FLASHING INSTALLATION
SECTION IV ASSEMBLY & INSTALLATION
SEALANT
1 1/2"
FIG. #33
12" MIN.
TO SPLICE JOINT
3"
TYP.
STEP 6)
1 1/2"
3/8"
K979
6" MIN.
attachment screws with sealant.
Cover the heads of all
# 1G83
# 1G83 sill flashing shown,
# 1G86 is similar.
attachment screws
SEALANT
with sealant.
Cover the heads of all
FIG. #32
TO SPLICE JOINT
12" MIN.
TYP.
3"
(CONT.)
406 STOREFRONT DPS 12/2002
PAGE 29
IF A CORNER IS REQUIRED, MITER THE FLASHING TO THE
REQUIRED ANGLE AND THEN INSTALL AS SHOWN IN THE FIGURES
BELOW. LOCATE FASTENERS 3" AWAY FROM ANY CORNER AND 1
1/2" FROM THE EDGE OF THE SILL FLASHING SPLICE.