ETS-Lindgren HI-4457 Isotropic Magnetic Field Probe (Archived) - Manual (Page 17)

Page — 12 HI n 4457 Manual
details regarding the observed symptom(s), and
whether the problem is constant or intermittent
in nature. If you have talked previously to
Holaday Customer Service about the problem,
provide the date(s), the name of the service
representative you spoke with, and the nature
of the conversation. Include the serial number
of the item being returned.
Step 2. The sensor and electronics housing are
engineered to operate as a unit and MUST be
returned together. Carefully package the probe
assembly in the carrying case. Use the original
boxes and packing materials, if possible. If not,
use the Parts List in Table 5 n 1 to order new
boxes and foam packing from Holaday
Industries, Inc.
NOTE
If your probe is calibrated in accordance with
MIL-Std-45662A, it is greatly to your benefit
to retain the original shipping box and packing
materials. One of the criteria for certifying a
calibration to MIL standards requires Holaday
Industries to always ship equipment in the
specified packaging. When a MIL Standard
instrument is sent to Holaday in other
packaging, we must replace it with the
specified packaging materials for return
shipment. YOU WILL BE BILLED FOR THE
NEW PACKAGING.
If the probe is under warranty, refer to the Limited
Warranty at the front of this manual for additional
information about your return.
Archived 4/2/10