ETS-Lindgren HI-4457 Isotropic Magnetic Field Probe (Archived) - Manual (Page 34)

HI n 4457 Manual Page — 29
level).
aaa = axis enable ("E" = enabled).
t = terminating carriage return.
Rx Rx, where x is the range.
x = "" returns the range currently in use
x = 1, 2, 3, 4 enables the selected range
x = N sets the probe to the next (higher)
range.
TF Txxx, where xxx is temperature in °
Fahrenheit.
TC Txxx, where xxx is temperature in °
Centigrade.
Vtx Vxx[xx...], where xx is table data in ASCII
hex.
Archived 4/2/10