Archived 4/2/10 – ETS-Lindgren HI-4457 Isotropic Magnetic Field Probe (Archived) User Manual
Page 24
Advertising
HI
n
4457 Manual
Page — 19
to perform a normal read cycle on the composite axis
signal. This procedure is executed for all ranges. When
the processor receives all the zero-field values, it stores
them in a special register; these values are subtracted
from all subsequent measurements. Therefore, a probe
which is zeroed while it is not in a zero field environment
will give erroneous readings.
Archived 4/2/10
Advertising