Kontron AT8242 - Manual (Page 37)

21 AT8242
www.kontron.com
3.3.2 Installing Memory
On an anti-static plane, place the board so that you
are facing the front plate connectors
Remove the memory protection top cover.
Insert the memory module into any available
socket, aligning the notches on the module with the
socket’s key inserts.
Push down the memory module until the retaining
clips lock on each side.
Repeat these steps to populate the other socket.
To remove a memory module from a socket, push
sideway the retaining clips on each side of the
socket, to release the module. Pull out the memory
from the socket.