Kontron KTQ67-FLEX - Manual (Page 13)

KTQ67 Users Guide
KTD-N0829-G Page 13
Hardware
Monitor
Subsystem • Smart Fan control system, support Thermal® and Speed® cruise for FAN_CPU
• CPU die temperature input (Precision +/- 3ºC)
• Voltage monitoring
• Intrusion (Case Open) detect input, (via Feature connector)
• Sleep S4/S5# Indication, (via Feature connector)
• System Powergood Signal, (via Feature connector)
Power
Supply Unit
ATX/BTX (w. ATX+12V) PSU for full PCI/PCIe load.
Battery
Exchangeable 3.0V Lithium battery for on-board Real Time Clock and CMOS RAM.
Manufacturer Panasonic / Part-number CR-2032L/BN, CR2032N/BN or CR-2032L/BE.
Approximate 5 years retention.
Current draw is 5,7µA when PSU is disconnected and 0 µA in S0 – S5.
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
BIOS
• Kontron Technology / AMI BIOS (EFI core version)
• Support for ACPI 3.0 ( Advanced Configuration and Power Interface), Plug & Play
o Suspend (S1 mode)
o Suspend To Ram (S3 mode)
o Suspend To Disk (S4 mode)
• “Always On” BIOS power setting
• RAID Support (RAID modes 0,1, 5 and 10)
Operating
Systems
Support • WinXP (32b *)
• Windows 7 (32b + 64b *)
• WES7 (32b * + 64b *)
• Linux Fedora *
• Linux Ubuntu *
• VxWorks (not ready yet)
*= Out Of The Box installation test only
System Specification