Kontron KTQ67-FLEX - Manual (Page 8)

KTQ67 Users Guide
KTD-N0829-G Page 8
Introduction
This manual describes the KTQ67/Flex and KTQ67/ATXE boards made by KONTRON Technology A/S.
The boards will also be denoted KTQ67 family if no differentiation is required.
The KTQ67 boards, all based on the Q67 chipset, support 2
nd
and 3
rd
generation Intel® i7 -, i5 -, i3
2Core and 4Core processor and the Celeron B810 2Core, see “Processor Support Table for more
specific details.
The KTQ67 family consist on members having different form factors, and the same functionality except
for the functions listed in the table below.
KTQ67 variants Format PCI LPT LVDS
KTQ67/Flex Flex 2 - -
KTQ67/ATXE ATX 5 - -
Note. LPT and LVDS are optionally for future variants. LPT and LVDS connectors can be found on
some EFT samples, but is unsupported.
Use of this Users Guide implies a basic knowledge of PC-AT hard- and software. This manual is
focused on describing the KTQ67 board’s special features and is not intended to be a standard PC-AT
textbook.
New users are recommended to study the short installation procedure stated in the following chapter
before switching-on the power.
All configuration and setup of the CPU board is either done automatically or manually by the user via
the BIOS setup menus. Only exception is the “Load Default BIOS Settings” Jumper.
Introduction