Kontron KTQ67-FLEX - Manual (Page 135)

KTQ67 Users Guide
KTD-N0829-G Page 135
10.6 Save & Exit
This Menu is special; having no “selections” for each function, or in other words, the function is the
same as the selection.
Note: When pressing <F7> while booting it is possible manually to select boot device.
Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Options
Save Changes
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
P0: ST3120827AS
Launch EFI Shell From filesystem device
Exit system setup after saving
the changes.
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.15.1236. Copyright © 2012 American Megatrends, Inc
Function Description
Save Changes and Exit Exit system setup after saving the changes.
Discard Changes and Exit Exit system setup without saving any changes.
Save Changes and Reset Reset the system after saving the changes.
Discard Changes and Reset Reset the system without saving any changes.
Save Changes Save Changes done so far to any of the setup options.
Discard Changes Discard Changes done so far to any of the setup options.
Restore Defaults Restore/Load Default values for all the setup options.
Save as User Defaults Save the Changes done so far as User Defaults.
Restore User Defaults Restore the User Defaults to all the setup options.
(possible list of boot devices)
Selection table of bootable devices. When selected system will boot
on selected device. (See note below)
Launch EFI Shell From
filesystem device Attempts to Launch EFI Shell application (Shellx64.efi) from one of the
available filesystem devices.
BIOS – Save & Exit