Kontron KTQ67-FLEX - Manual (Page 59)

KTQ67 Users Guide
KTD-N0829-G Page 59
7.1.4 PCI-Express x4 Connector (PCIe x4) (J33)
The KTQ67 supports one PCIex4 in a PCIex16 slot. All GND pins in the PCIEx16 connector are
connected to GND, but all signal pins from pin 33 and above are all unconnected. (EFT samples
support only PCIe x1).
Note 1: 10K ohm pull-up to 3V3 Dual.
Note Type Signal PIN Signal Type Note
+12V B1 A1 NC
+12V B2 A2 +12V
+12V B3 A3 +12V
GND B4 A4 GND
SMB_CLK B5 A5 NC
SMB_DATA B6 A6 NC
GND B7 A7 NC
+3V3 B8 A8 NC
NC B9 A9 +3V3
SB3V3 B10 A10 +3V3
WAKE# B11 A11 RST#
NC B12 A12 GND
GND B13 A13 PCIE_x16 CLK
PEG_TXP[0] B14 A14 PCIE_x16 CLK#
PEG_TXN[0] B15 A15 GND
GND B16 A16 PEG_RXP[0]
1 CLKREQ B17 A17 PEG_RXN[0]
GND B18 A18 GND
PEG_TXP[1] B19 A19 NC
PEG_TXN[1] B20 A20 GND
GND B21 A21 PEG_RXP[1]
GND B22 A22 PEG_RXN[1]
PEG_TXP[2] B23 A23 GND
PEG_TXN[2] B24 A24 GND
GND B25 A25 PEG_RXP[2]
GND B26 A26 PEG_RXN[2]
PEG_TXP[3] B27 A27 GND
PEG_TXN[3] B28 A28 GND
GND B29 A29 PEG_RXP[3]
NC B30 A30 PEG_RXN[3]
NC B31 A31 GND
GND B32 A32 NC
Slot Connectors