Kontron KTQ67-FLEX - Manual (Page 53)

KTQ67 Users Guide
KTD-N0829-G Page 53
6.15 XDP-CPU (Debug Port for CPU) (J14)
The XDP-CPU (Intel Debug Port for CPU) connector is not mounted and not supported. XDP connector
layout (pads) is located on the backside of PCB and is prepared for the Molex 52435-2671 (or 52435-
2672).
Pin Signal Description Type Pull Up/Down Note
1 OBSFN_A0
2 OBSFN_A1
3 GND PWR -
4 NC NC -
5 NC NC -
6 GND PWR -
7 NC NC -
8 NC NC -
9 GND PWR -
10 HOOK0
11 HOOK1
12 HOOK2
13 HOOK3
14 HOOK4
15 HOOK5
16 +5V PWR -
17 HOOK6
18 HOOK7 500R (500R by 2x1K in parallel)
19 GND PWR -
20 TDO /51R
21 TRST# /51R
22 TDI /51R
23 TMS /51R
24 NC NC -
25 GND PWR -
26 TCK0 /51R
Internal Connectors