Kontron COMe-cP2020 - Manual (Page 11)

www.kontron.com
COMe-P2020 User Guide
11
1 Introduction
1.1 COMe-cP2020 Overview
The COMe-cP2020 is a COM Express® form factor compliant Power Architecture® processor module based on Freescale's
QorIQ™ 32-bit P2020 processor.
Designed in the COM Express® basic (95 mm x 95 mm) form factor the module incorporates the Freescale QorIQ P2020 dual-
core Power Architecture® processor operating up to 1.2 GHz - other processor versions (P2010, P1020 and P1011) and
operating speeds are available on request. Featuring 32-bit technology, it integrates up to 4 GByte of soldered DDR3
SDRAM at 667 MHz and ECC support. 512 KBytes of shared second level cache facilitate core-to-core communications to
minimize accesses to main memory.
Up to 2 GByte of NAND Flash as well as a socket for MicroSD card offer reliable storage space for application data. In terms
of I/Os, the module interfaces the QorIQ-specific I/Os to the carrier board. In addition to USB 2.0 ports there are also UART
(TxD, RxD, RTC and CTS) and Gigabit Ethernet interfaces.
Flexible interface support is guaranteed by 4 SERDES lanes, which can be configured according to application-specific
needs. A comprehensive range of different combinations, for example as PCIe x4, sRIO x4 and Serial Gigabit Media Inde-
pendent Interface (SGMII) is available.
The COMe-cP2020 targets high-bandwidth telecommunication and data processing applications. With its long-term avail-
ability of more than 10 years, it is also a good fit to be used in long life cycle network applications in the medical, military
and transportation markets.
Kontron offers two modules in standard and extended temperature range:
• COMe-cP2020c
• P2020NSN2MFC 1200 MHZ
• 2 GByte 667 MHz DDR3 Memory
• 1 GByte NAND
• 0°C - 60 °C Ambient Temperature
• Standard COMe Heatspreader
• COMe-cP2020i
• P2020NXN2KFC 1000 MHZ
• 2 GByte 667 MHz DDR3 Memory
• 1 GByte NAND
• -40°C - 85 °C Ambient Temperature
• Extended 95x95 mm Forced Air Cooling Heatsink