Table 3-48, Table 3-49 – Kontron COMe-cP2020 User Manual
Page 62
www.kontron.com
COMe-P2020 User Guide
62
Table 3-48:
0x309: Default eTSEC2 Protocol Configuration Register (Reserved, See note!)
ACTION
D7
D6
D5
D4
D3
D2
D1
D0
READ
NU
NU
NU
NU
NU
NU
cfg_tsec2_prto[0:1]
WRITE
NU
NU
NU
NU
NU
NU
NU
POWER UP
1
1
1
1
1
1
1
1
BITFIELD
DESCRIPTION
[D0-D1]
00
Reserved
01
The eTSEC2 controller operates using the MII protocol (or RMII if
configured in reduced mode if not conf igured to operate in SGMII mode.
10
The eTSEC2 controller operates using the GMII protocol (or RGMII if
configured in reduced mode if not conf igured to operate in SGMII mode.
11
The eTSEC2 controller operates using the TBI protocol (or RTBI if
configured in reduced mode if not conf igured to operate in SGMII mode.
N O T I C E
Equivalent CPU strapping is hard coded in CPLD depends on board variant, read value is always 0xFC.
Table 3-49:
0x30A: Default eTSEC3 Protocol Configuration Register (Reserved, See note!)
ACTION
D7
D6
D5
D4
D3
D2
D1
D0
READ
NU
NU
NU
NU
NU
NU
cfg_tsec2_prto[0:1]
WRITE
NU
NU
NU
NU
NU
NU
NU
POWER UP
1
1
1
1
1
1
1
1
BITFIELD
DESCRIPTION
[D0-D1]
00
Reserved
01
The eTSEC3 controller operates using the RMII protocol if not configured
to operate in SGMII mode.
10
The eTSEC3 controller operates using the RGMII protocol if not
configured to operate in SGMII mode.
11
The eTSEC3 controller operates using the RTBI protocol if not conf igured
to operate in SGMII mode (default).
N O T I C E
Equivalent CPU strapping is hard coded in CPLD depends on board variant, read value is always 0xFC.