Kontron COMe-cP2020 - Manual (Page 69)

www.kontron.com
COMe-P2020 User Guide
69
Table 3-66: 0x376: Board Interrupt Pending Register 1
ACTION D7 D6 D5 D4 D3 D2 D1 D0
READ 0 0 0 Int4 Int3 Int2 Int1 Int0
WRITE NU NU NU w1c w1c w1c w1c w1c
POWER UP 0 0 0 0 0 0 0 0
BITFIELD DESCRIPTION
[D0] Int0 Interrupt occurred, triggered by CON_IRQ[1]# line. Register is cleared by write to '1':
'0' = no Interrupt
'1' = Interrupt is active
[D1] Int1 Interrupt occurred, triggered by CON_IRQ[2]# line. Register is cleared by write to '1':
'0' = no Interrupt
'1' = Interrupt is active
[D2] Int2 Interrupt occurred, triggered by CON_IRQ[3]# line. Register is cleared by write to '1':
'0' = no Interrupt
'1' = Interrupt is active
[D3] Int3 Interrupt occurred, triggered by CON_IRQ[4]# line. Register is cleared by write to '1':
'0' = no Interrupt
'1' = Interrupt is active
[D4 Int4 Interrupt occurred, triggered by CON_IRQ[5]# line. Register is cleared by write to '1':
'0' = no Interrupt
'1' = Interrupt is active
Table 3-67: 0x377: Board Interrupt Pending Register 2
ACTION D7 D6 D5 D4 D3 D2 D1 D0
READ Int7 Int6 Int5 Int4 Int3 Int2 Int1 Int0
WRITE w1c w1c w1c w1c w1c w1c w1c w1c
POWER UP 0 0 0 0 0 0 0 0
BITFIELD DESCRIPTION
[D0] Int0 Interrupt occurred, triggered by CON_SMB_ALERT# line. Register is cleared by write to '1':
'0' = no Interrupt
'1' = Interrupt is active
[D1] Int1 Interrupt occurred, triggered by LM73_TEMP_ALERT# line. Register is cleared by write to '1':
'0' = no Interrupt
'1' = Interrupt is active
[D2] Int2 Interrupt occurred, triggered by CON_THERM# line. Register is cleared by write to '1':
'0' = no Interrupt
'1' = Interrupt is active
[D3] Int3 Interrupt occurred, triggered by CON_PWR_OK line. Register is cleared by write to '1':
'0' = no Interrupt
'1' = Interrupt is active
[D4] Int4 Interrupt occurred, triggered by CON_BATLOW# line. Register is cleared by write to '1':
'0' = no Interrupt
'1' = Interrupt is active
[D5] Int5 Interrupt occurred, triggered by RTC_INT# line. Register is cleared by write to '1':
'0' = no Interrupt
'1' = Interrupt is active
[D6] Init6 Interrupt occurred, triggered by CON_WAKE0# line. Register is cleared by write to '1':
'0' = no Interrupt
'1' = Interrupt is active
[D7] Init7 Interrupt occurred, triggered by CON_WAKE1# line. Register is cleared by write to '1':
'0' = no Interrupt
'1' = Interrupt is active