Kontron COMe-cP2020 - Manual (Page 9)

www.kontron.com
COMe-P2020 User Guide
9
Proprietary Note
This document contains information proprietary to Kontron. It may not be copied or transmitted by any means, disclosed to
others, or stored in any retrieval system or media without the prior written consent of Kontron or one of its authorized
agents.
The information contained in this document is, to the best of our knowledge, entirely correct. However, Kontron cannot
accept liability for any inaccuracies or the consequences thereof, or for any liability arising from the use or application of
any circuit, product, or example shown in this document.
Kontron reserves the right to change, modify, or improve this document or the product described herein, as seen fit by Kon-
tron without further notice.
Trademarks
Kontron and the Kontron logo are trade marks owned by Kontron AG, Germany. In addition, this document may include
names, company logos and trademarks, which are registered trademarks and, therefore, proprietary to their respective
owners.
Environmental Protection Statement
This product has been manufactured to satisfy environmental protection requirements where possible. Many of the com-
ponents used (structural parts, printed circuit boards, connectors, batteries, etc.) are capable of being recycled.
Final disposition of this product after its service life must be accomplished in accordance with applicable country, state, or
local la
ws or regulations.
General Instructions on Usage
I n order to maintain Kontron’s product warranty, this product must not be altered or modified in any way. Changes or mod-
ifications to the device, which are not explicitly approved by Kontron and described in this manual or received from Kon-
tron’s Technical Support as a special handling instruction, will void your warranty.
This device should only be installed in or connected to systems that fulfill all necessary technical and specific environmen-
tal requirements. This applies also to the operational temperature range of the specific system version, which must not be
exceeded. If batteries are present their temperature restrictions must be taken into account.
In performing all necessary installation and application operations, please follow only the instructions supplied by the
present manual.
Keep all the original packaging material for future storage or warranty shipments. If it is necessary to store or ship the sys-
tem, please re-pack it as nearly as possible in the manner in which it was delivered.
Special care is necessary when handling or unpacking the product. Please consult the special handling and unpacking
instruction on the previous page of this manual.
Two Year Warranty
Kontron grants the original purchaser of Kontron’s products a
TWO YEAR LIMITED HARDWARE WARRANTY as described in the follow-
ing. However, no other warranties that may be granted or implied by anyone on behalf of Kontron are valid unless the con-
sumer has the express written consent of Kontron.
Kontron warrants their own products, excluding software, to be free from manufacturing and material defects for a period
of 24 consecutive months from the date of purchase. This warranty is not transferable nor extendible to cover any other
users or long-term storage of the product. It does not cover products which have been modified, altered or repaired by any
other party than Kontron or their authorized agents. Furthermore, any product which has been, or is suspected of being
damaged as a result of negligence, improper use, incorrect handling, servicing or maintenance, or which has been dam-
aged as a result of excessive current/voltage or temperature, or which has had its serial number(s), any other markings or
parts thereof altered, defaced or removed will also be excluded from this warranty.
If the customer’s eligibility for warranty has not been voided, in the event of any claim, he may return the product at the
earliest possible convenience to the original place of purchase, together with a copy of the original document of purchase,
a full description of the application the product is used on and a description of the defect. Pack the product in such a way as
to ensure safe transportation (see our safety instructions).