Mercedes-Benz S-Class 2009 - Manual (Page 137)

COMAND navigation system (Point of interest entry)
135
Main category list without input
characters
Example illustration: Main category list for POIs in
the surrounding area
1
Category
2 Symbol for available POIs or other
available subcategories
X Selecting a main category: Slide q m r or
rotate y m z .
X Canceling selection: Select Back and
press n.
or
X Press back button L in the center
console ( Y page 90).
X Confirming selection: Press n.
Main categories with symbol
2 contain
either POIs or subcategories. Further
operation depends on whether the
selected main category contains
subcategories or only POIs.
Selected main category contains
subcategories:
Selecting such a main category opens a list
of subcategories. The illustration below
shows by way of example the RESTAURANT
main category with available subcategories
4 .
1 Main category
2 To show all POIs for all subcategories
under category
1
3 Symbol for available POIs
4 Subcategory
X Selecting a subcategory: Slide q m r or
rotate y m z .
X Canceling selection: Select Back and
press n.
or
X Press back button L in the center
console ( Y page 90).
X Confirming selection: Press n.
After selecting a subcategory, a list of POIs
appears. It contains the POIs available
within the search radius of the
subcategory.
i If you have selected list item 2 , the POI
list contains all POIs for all subcategories
within the search radius of main category
1 .
Selected main category contains no
subcategories, but only POIs:
Selecting such a main category immediately
opens a list of POIs. The POI list contains the
available POIs within the search radius of the
main category.
POI list
Depending on the situation, COMAND first
shows the following list or the POI list with
input characters.
Control systems
Z