Mercedes-Benz S-Class 2009 - Manual (Page 168)

COMAND telephone
166
selected and the s button on the
telephone keypad does not function.
Placing a call to a call list entry or
COMAND phone book entry
X Call up a call list and select an entry
(
Y page 162).
or
X Call up COMAND phone book and select an
entry (
Y page 169).
X Connecting a call: Press n.
Speed dialing
You can save telephone numbers in the
speed-dial preset locations on the mobile
phone and call up the speed-dial presets (see
mobile phone operating instructions).
i By default, the mailbox number is preset
in the speed dial memory unless you have
modified it. For more information on the
mailbox (
Y page 162).
You can also call up speed-dial numbers using
COMAND.
i Operation during call connection depends
on the speed-dial preset position called up.
Calling up speed-dial presets using the
COMAND controller
X Switching screen to telephone mode:
Call up main telephone menu
(
Y page 161).
X Entering number of a speed-dial
preset: Select all the digits in sequence.
Deleting individual digits: Select
) and
briefly press n.
Deleting entire number: Select
) and
press n until the number is deleted.
X Connecting a call (speed-dial presets
1 - 99): Select S .
or
X Connecting a call (speed-dial presets
100 - 999): Select # after the digits
£
S .
In both cases, the telephone connects the
call to the saved telephone number. If the
speed-dial memory contains no telephone
numbers, you will see a corresponding
message.
X Deleting message: Press n.
Calling up speed-dial numbers using the
telephone keypad
X Switching screen to telephone mode:
Call up main telephone menu
(
Y page 161).
X Single-digit numbers: Press and hold the
A - 9 buttons.
or
X Single- and two-digit numbers: Enter
number using the A - 9 buttons.
X Press s .
or
X Three-digit numbers: Enter number using
the A - 9 buttons.
X Press # , and then s .
In all three cases, COMAND connects the
call to the saved telephone number. If the
speed-dial memory contains no telephone
numbers, you will see a corresponding
message.
X Deleting message: Press n.
Control systems