Mercedes-Benz S-Class 2009 - Manual (Page 167)

COMAND telephone
165
X Use the mobile phone (see mobile phone
operating instructions).
or
X Use the Bluetooth ® headset (see headset
operating instructions).
i The use of a Bluetooth ® headset requires
Bluetooth ® to be activated and the
Bluetooth ® headset to be authorized
( Y page 184).
If you have accepted the call using COMAND,
the telephone keypad, the multifunction
steering wheel or the mobile phone, the call
will be conducted via the hands-free system.
The volume of the call can be adjusted
(
Y page 92).
If you have accepted the call using the
Bluetooth
® headset, the call will be
conducted via the headset.
Further operating functions can be found in
the “Functions during a single-call
connection” section (
Y page 167).
You can also accept a call if the COMAND
display is showing a screen other than the
telephone mode screen. After accepting the
call, you will see the caller’s data in a window.
X Closing window: Slide q m r or o m p or
press n.
Making an outgoing call
i If you place an outgoing call and receive
a busy signal, the telephone automatically
starts to redial as long as the provider and
the mobile phone support this function (see
mobile phone operating instructions).
While the call is connecting, you can also
send character strings (
Y page 167).
Entering the telephone number using
the COMAND controller
X Switching screen to telephone mode:
Call up main telephone menu
(
Y page 161).
X Entering digits: Select desired digits by
rotating y m z or sliding o m p and
press n.
X Deleting individual digits: Select ) and
briefly press n.
X Deleting an entire telephone number:
Select ) and press and hold n until the
telephone number is deleted.
X Connecting a call: Select S .
Entering a telephone number using the
telephone keypad
X Switching screen to telephone mode:
Call up main telephone menu
(
Y page 161).
X Use telephone keypad to enter digits.
i A detailed description of how to enter
digits using the telephone keypad can be
found on (
Y page 158).
X Connecting a call: Press s .
Redial
X Switching screen to telephone mode:
Call up main telephone menu
(
Y page 161).
X Use COMAND controller to select S .
or
X Press s on the telephone keypad
( Y page 158).
The list of dialed numbers appears. The
most recently dialed number is at the top.
X Select desired entry.
X Connecting a call: Press n.
i If the list of dialed calls contains no
entries, the S menu item cannot be
Control systems
Z