Audio aux, Video aux, Control systems – Mercedes-Benz S-Class 2009 User Manual

Page 213

Advertising
background image

COMAND AUX

211

Audio AUX

Switching to Audio AUX mode

X

Select Audio

£

Audio

£

AUX.

The Audio AUX menu appears. You will hear
the medium in the external audio source if
it has been connected and switched to
play.

i

Please refer to the corresponding

operating instructions for information
about how to operate the external audio
source.

You can adjust the following settings in Audio
AUX mode:

R

Volume (

Y

page 92)

R

Balance and fader (

Y

page 93)

R

Treble and bass (

Y

page 93)

R

Surround sound (

Y

page 93)

G Warning

Due to the different volumes of the external
audio sources, system messages (e.g.
navigation announcements) may be much
louder. You may need to disable these
system messages or adjust the volume of
these messages manually.

i

The volume of external audio sources is

extremely variable. It is possible that a
device connected as an external audio
source will sound quieter or louder in the
vehicle or that the usual maximum volume
cannot be achieved. On certain devices the
volume can be set separately. In this case
start at a moderate volume and increase it
slowly. In this way you can determine
whether the system is capable of playback
without distortion, even at high volume.

Video AUX

Automatic picture fade-out

If a video is playing when the vehicle is shifted
from park position

P into neutral position N,

drive position

D or reverse gear R the picture

is faded out automatically and the following
message appears in the display: In order

not to distract driver, picture is

faded out while the vehicle is in

motion.
When the vehicle is shifted back into park
position

P, the picture comes on again.

Switching to Video AUX mode

X

Select Video

£

Video

£

AUX.

The Video AUX menu appears. You will see
the medium in the external audio source if
it has been connected and switched to
play.

Control systems

Z

Advertising