Tire and loading terminology – Mercedes-Benz S-Class 2009 User Manual

Page 472

Advertising
background image

Tires and wheels

470

i

For illustration purposes only. Actual data

on tires are specific to each vehicle and
may vary from data shown in above
illustration.

This marking tells you about the type of cord
and number of plies in the sidewall and under
the tread.

Tire and loading terminology

Accessory weight

The combined weight (in excess of those
standard items which may be replaced) of
automatic transmission, power steering,
power brakes, power windows, power seats,
radio, and heater, to the extent that these
items are available as factory-installed
equipment (whether installed or not).

Air pressure

The amount of air inside the tire pressing
outward on each square inch of the tire. Air
pressure is expressed in pounds per square
inch (psi), or kilopascal (kPa) or bar.

Aspect ratio

Dimensional relationship between tire
section height and section width expressed
in percentage.

Bar

Another metric unit for air pressure. There are
14.5038 pounds per square inch (psi) to
1 bar; there are 100 kilopascals (kPa) to 1 bar.

Bead

The tire bead contains steel wires wrapped by
steel cords that hold the tire onto the rim.

Cold tire inflation pressure

Tire inflation pressure when your vehicle has
been sitting for at least 3 hours or driven no
more than 1 mile (1.6 km).

Curb weight

The weight of a motor vehicle with standard
equipment including the maximum capacity
of fuel, oil, and coolant, and, if so equipped,
air conditioning and additional optional
equipment, but without passengers and
cargo.

DOT (Department of Transportation)

A tire branding symbol which denotes the tire
meets requirements of the U.S. Department
of Transportation.

GAWR (Gross Axle Weight Rating)

The GAWR is the maximum permissible axle
weight. The gross vehicle weight on each axle
must never exceed the GAWR for the front
and rear axle indicated on the certification
label located on the driver’s door B-pillar.

GVW (Gross Vehicle Weight)

The GVW comprises the weight of the vehicle
including fuel, tools, spare wheel, installed
accessories, passengers and cargo and, if
applicable, trailer tongue load. The GVW must
never exceed the GVWR indicated on the
certification label located on the driver’s door
B-pillar.

GVWR (Gross Vehicle Weight Rating)

This is the maximum permissible vehicle
weight of the fully loaded vehicle (weight of
the vehicle including all options, passengers,
fuel, and cargo and, if applicable, trailer

Operation

Advertising