Synchronizing, Panorama roof with power tilt/sliding panel, Extending and retracting the roller sunblinds – Mercedes-Benz S-Class 2009 User Manual

Page 411: Controls in detail

Advertising
background image

Panorama roof with power tilt/sliding panel

409

Synchronizing

The tilt/sliding sunroof must be synchronized
after a malfunction or if it does not open
smoothly.

!

If the tilt/sliding sunroof cannot be closed

or synchronized, contact an authorized
Mercedes-Benz Center or call Roadside
Assistance.

X

Switch on the ignition.

X

Press and hold the sunroof switch in
direction of arrow

1

(

Y

page 407) until the

tilt/sliding sunroof is fully raised at the
rear.

X

Keep holding the sunroof switch in
direction of arrow

1

for approximately

1 second.

X

Check the express operation feature
(

Y

page 407).

If the tilt/sliding sunroof opens and closes
completely, the roof is synchronized.
Otherwise repeat the above steps.

Panorama roof with power tilt/sliding

panel

Extending and retracting the roller

sunblinds

The roller sunblinds only operate with the tilt/
sliding panel closed. The front and rear roller
sunblind can be operated individually.

X

Switch on the ignition.

Operating front roller sunblind

G Warning!

When extending the front roller sunblind,
make sure no one is in danger of being
injured by the extending procedure.
The front roller sunblind is equipped with
the express operation and automatic
reversal function. If the movement of the
front roller sunblind is blocked during the
extending procedure, the front roller
sunblind will stop and retract slightly.
The extending of the front roller sunblind
can be immediately halted by releasing the
roof panel switch or, if the roof panel switch
was moved past the resistance point and
released, by moving the roof panel switch
in any direction.

Roof panel switch
1

Retracting

2

Retracting

3

Extending

X

Retracting/Extending: Move the roof

panel switch to the resistance point in the
required direction of arrow

1

,

2

or

3

until the front roller sunblind has reached
its desired position.

X

Express operation: Move the roof panel

switch past the resistance point in
direction of arrow

1

,

2

or

3

and release.

The front roller sunblind retracts/extends
completely.

X

Stopping during express operation:

Move the roof panel switch in any direction.

Controls in detail

Z

Advertising