Mercedes-Benz S-Class 2009 - Manual (Page 170)

COMAND telephone
168
X Sending individual characters: Rotate
y m z or slide o m p and select desired
character.
Each character you select can be seen in
the main area and is sent immediately.
X Sending a phone book entry as a
character string: Select Name.
X Select desired phone book entry.
The entry is immediately sent as a
character string.
i Telephone numbers containing the +
character may impair the function.
X Switching back to the call display:
Select Y .
Sending character strings via the
telephone keypad
X Press corresponding button on telephone
keypad.
Each character you select is immediately
sent.
i The + character may impair the function.
Ending an active call
X Ending a call: Select 4
END in the call
display.
or
X Press t on the telephone keypad or on
the multifunction steering wheel.
The COMAND display will change to the
previously selected display, if applicable.
Transferring a call
From the hands-free system to the
Bluetooth
® headset
i The use of a Bluetooth ® headset requires
Bluetooth ® to be activated and the
Bluetooth ® headset to be authorized
( Y page 184).
The call transfer is controlled by pressing the
PTT button on the Bluetooth
® headset (see
headset operating instructions). Normally, it
is sufficient to press the PTT button once, but
under certain circumstances you may have to
press it a second time.
Once the call has been transferred to the
Bluetooth
® headset, all the functions will be
available to you which are described in the
“Functions during a single-call connection”
section (
Y page 167).
Exception: “Switching the hands-free
microphone on or off” function
(
Y page 167).
From the Bluetooth ® headset to the
hands-free system
On most Bluetooth ® headsets, you press the
PTT button on the headset twice quickly to
transfer the call (see headset operating
instructions).
From the hands-free system to the
mobile phone
X If the mobile phone has a folding upper
section: Flip upper section open.
X Take mobile phone out of cradle.
The No telephone inserted message
appears on the COMAND display.
Subsequent operation is only possible
using the mobile phone.
From the mobile phone to the hands-
free system
X Insert mobile phone into cradle.
Once the call has been transferred to the
hands-free feature, all the functions will be
Control systems