Rice Lake 120 Plus Digital Weight Indicator - Manual (Page 17)

Configuration 13
3.0 Configuration
The following sections provide graphic representations of the indicator menu structures. The top level menu
structure of the weight indicator is as follows:
Figure 3-1. Configuration Menu
The following table gives a brief introduction to what each menu item does.
The front panel keys can be used as directional keys to navigate through the menus in configuration mode. An
example of navigation process is shown below in Figure 3-2.
Figure 3-2. Navigating the Setup Menu
Main Menu Function
Configuration Menu Sets parameters affecting weighing function:
• Number of full scale graduations
• Range within which the scale can be zeroed
• Change in load at which the scale will exit the stable condition
• Uses the regulatory mode
Format Menu Sets the format for calculation and display of various units like:
• Primary and secondary units
• Multiplier exponent
• Rate at which the display is refreshed
Calibration Menu Calibrates the indicator
Serial Menu Configures the parameters of the serial ports
Program Menu Sets the power up mode, shut down method, back light, keyboard
lock, and consecutive number values
Print Format Menu Sets the print format used for gross and net tickets
Set Points Menu Sets the two setpoints
Time Menu Sets the current time
Date Menu Sets the current date
Version Menu Displays the installed software version number
Table 3-1. 120 Plus Menu Structure
CONFIGURATION FORMAT CALIBRATION SERIAL PROGRAMME PRINT FORMAT
TIME DATE VERSION SET POINTS
1st Level
Parameter
2nd Level
Parameter
1st Level
Parameter
2nd Level
Parameter
Present value Value Value Value