Rice Lake 120 Plus Digital Weight Indicator - Manual (Page 44)

40 120Plus Digital Weight Indicator Technical Manual
8.1.9 Other Commands
8.1.10 Key Press on EDP Commands
8.1.11 Tare, Zero key and REGULAT Parameter
The function of the TARE and ZERO keys depends on the value specified for the REGULAT parameter. Table 8-11
below describes the function of these keys for each of the regulatory modes.
Command Description Values
DEFAULT Reset default parameter values -
RS Software Reset
IO Report status 4 ports IO and set point I3, I2, I1, O3, O2, O1
Table 8-9. Other Commands
Command Description Values
KZERO Same function as ZERO key press -
KGROSSNET Same function as GROSS/NET key press -
KTARE Same function as TARE key press -
KUNITS Same function as UNITS key press -
KPRIUNIT Force to primary unit -
KSECUNIT Force to secondary unit -
KPRINT Same function as PRINT key press -
KHOLD Same function as HOLD key press
KENTER Same function as ENTER key press
KPTARE Same function as PRESET TARE key press
KCLEAR Same function as CLEAR key press
KNR0-9 Same function as 0-9 key press
Table 8-10. Key Press Commands
REGULAT
parameter value Weight on scale Tare in system
Key press function
KTARE KZERO
USA zero or negative no no active zero
yes clear tare
positive no tare
yes tare
CANADA zero or negative no no active zero
yes clear tare
positive no tare
yes no active
EUROPE zero or negative no no active zero
yes clear tare zero and clear tare
positive no tare zero
yes tare zero and clear tare
NONE zero or negative no tare zero
yes clear tare
positive no tare
yes clear tare
Table 8-11. Regular Parameter Values