Rice Lake 920i Installation Manual V1.05 - Manual (Page 18)

14 920i Installation Manual
33 68536 Ribbon cable to interface board, desktop (1) 2-16 —
68662 Ribbon cable to interface board, universal (1) — 2-19
34 16892 Ground/Earth label (1) 2-16 2-19
35 15650 Cable tie mounts, 3/4 in. (4) 2-15
40 53308 Model/serial number label (1) 2-14
41 68532 Single-channel A/D card (1, can be single- or dual-channel A/D) 2-17 —
68533 Dual-channel A/D card (1, can be single- or dual-channel A/D) — 2-19
43 71027 Fuses (115 VAC models), 2 A Time-Lag TR5 (2) 2-14 2-18
71026 Fuses (230 VAC models), 2 A Time-Lag TR5 (2)
44 46192 Ribbon cable clamp (2–desktop only) 2-17 —
45 67869 Interface board (1) 2-15 2-19
46 14832 Machine screws, 4-40NC x 3/8 (2)
47 22086 Machine screws, 6-32NC x 1/4 (8) 2-14 2-18
50 15628 Cord grips, 1/2 NPT (2)
52 30376 Nylon seal rings for 1/2 NPT cord grips (2)
53 15630 Lock nuts for 1/2 NPT cord grips (2)
54 70069 3V Lithium coin battery — 2-20
55 69898 Nylon spacers (4) 2-14 2-18
— 66502 Switch panel membrane (1)
* Additional parts included in parts kit.
To protect against the risk of fire, replace fuses only with same type and rating fuse.
See Section 10.13 on page 107 for complete fuse specifications.
Ref
Number PN Description (Quantity)
See Figure
Desktop Universal
Table 2-7. Replacement Parts (Continued)
Caution