Rice Lake Datalogic PowerScan PD7100 Series Laser Scanner - Manual (Page 41)

Scanning Features
Product Reference Guide 33
Stand Mode Triggered Timeout
This feature specifies the time to remain in Trigger Single mode after the trigger is pulled
while in Stand Mode .
NOTE
This timeout is only used when the Scan Mode is configured as Stand
Mode .
ENTER/EXIT PROGRAMMING MODE
Stand Mode Triggered Timeout = 0.5 Seconds
Stand Mode Triggered Timeout = 1.5 Seconds
Stand Mode Triggered Timeout = 2 Seconds
Stand Mode Triggered Timeout = 3 Seconds
Stand Mode Triggered Timeout = 4 Seconds
DEFAULT