Laser pointer period, Default – Rice Lake Datalogic PowerScan PD7100 Series Laser Scanner User Manual
Page 51
Advertising
Laser Pointer Period
Product Reference Guide
43
Laser Pointer Period
This option specifies the period of the laser pointer blink during scanning. The laser
pointer will be activated for the time specified by
OFF then ON at 50% duty cycle for the duration set by
ENTER/EXIT PROGRAMMING MODE
Laser Pointer Period = Disable
Laser Pointer Period = 500 ms
Laser Pointer Period = 1 Second (1,000 ms)
Laser Pointer Period = 1.5 Seconds (1,500 ms)
Laser Pointer Period = 2 Seconds (2,000 ms)
DEFAULT
Advertising