Rice Lake Datamax-ONeil I-4212e Mark II - Manual - Manual (Page 39)

Chapter 3 - Printer Operation 33
Advanced Entry Calibration (continued)
Step Action Displayed Message Comment
N
Press the ESC Key.
Use the buttons to scroll to PAPER
SENSOR LEVEL (or if using
reflective media, REFL PAPER
LEVEL) and then press ENTER.
Use the buttons to set the Paper
value determined in Step M and
then press ENTER.
PAPER SENSOR LEVEL
(0 - 255)
173
This is the Paper value.
O
Press the ESC Key.
Scroll to GAP SENSOR LEVEL (or,
if using reflective media, MARK
SENSOR LEVEL) and then press
ENTER.
Set the Gap (or Mark) value
determined in Step M and then
press ENTER.
GAP SENSOR LEVEL
(0 - 255)
042
This is the Gap (or Mark) value.
P
Press the ESC Key.
Scroll to EMPTY SENSOR LEVEL
and then press ENTER.
Set the Empty value determined in
Step M and then press ENTER.
EMPTY SENSOR LEVEL
(0 - 255)
009
This is the Empty value.
Q
Press the EXIT Key and, when
prompted, press YES at the SAVE
CHANGES prompt.
OFFLINE
The procedure is finished, the
process almost complete.