Rice Lake Ishida iPC-WP Portable Bench Scales - Manual (Page 12)

9/32 IPC-WP Series Service Manual
Chapter 2 Test Mode
The Test Mode is used for diagnosis and/or setting at maintenance service.
2.1 Test Mode Flow
Note: Press the memory switch at any time during test mode to record the data to the E2PROM.
Then “P-EP” appears in the display.
Program No. display START L003b
TARE
TARE
Setup of scale No.
and decimal point
Span adjustment
Setting measuring conditions
E2ROM clear
*
ON/OFF
C2 XX
C3
F x x x
END
Setup of country No. C1 X
TARE
TARE
TARE
TARE
TARE
*
ZERO * +