2 starting test mode, 3 ending test mode, Key functions (when setting value) – Rice Lake Ishida iPC-WP Portable Bench Scales User Manual
Page 13
10/32
IPC-WP Series Service Manual
¡Key Functions (when setting value)
Key
Function
Asia
Oceania
EU
USA
x
Use at TEST mode startup.
(Press this key while the TARE key is depressed.)
x
Use at TEST mode end
x
Use when selecting digits.
x
Press when fixing values after mode or data selection.
x
Increments values for each press during data change.
x
Press when entering C3 or F mode
Memory
Switch
(Tactile switch in the main circuit board)
Stores E2ROM data set for each item of the C and F
mode.
2.2
Starting Test Mode
Operation
Display
1. Press and release the ON/OFF key while the TARE key is
depressed.
2. Release the TARE key.
2.3
Ending Test Mode
Operation
Display
1. C mode / F mode status
2. Release the ON/OFF key after depressing for one second
or more.